Number 1 comes completely assembled ready to use. It is only necessary to apply the heat pad. The synthetic urine sample has been irradiated in order to prevent the growth of bacteria.
Place Number 1 around your waist with the vinyl bag against your abdomen. It must be against your bare skin in order to allow for proper heat transfer. Be sure that the drain tube is on the bottom allowing the correct flow. Do not kink or bind the tubing. The two clips can be moved along the tube to provide convenient access. Be sure that one clip is always closed before moving the other.
If you are tested randomly, and want to be always ready, you can wear Number 1 and keep the wrapped pad in your pocket until needed. In order to stall for enough time for the sample to reach the correct temperature, you might explain that you just recently urinated and ask for a glass of water. Your own body is the main heat source for Number 1 and, without the heat pad, will maintain the temperature at approximately 90 degrees.
Number 1 holds three and a half ounces of synthetic urine and most testing requires only one and a half ounces. So, if careful, you can use your sample for a second test if needed. |
